THE GO-ANYWHERE VEHICLE FROM $199,000

A Sherp is an amphibian all-terrain vehicle that can overcome the most difficult obstacles, traversing 35° slopes, wading through water, and overcoming any obstacle in its path. This private recreational vehicle has been made for true adventurers.

Schedule Test Drive

SPEED

Land up to 40km/h
Water up to 6km/h

FUEL

Up to 3L/h
56L capacity

ENGINE

Kubota V1505-t / E3B
5 speed manual gearbox

DIMENSIONS

1300 dry tare weight
3404L x 2520W x 2520H (mm)



KUBOTA MOTOR

Kubota is a Japanese engine, known for its reliability and durability. It has no electronics, which means it is ready to operate in adverse conditions of the harshest climatic zones.



SIMPLE TO REPAIR

Maintenance or repair can be performed directly from the passenger compartment. All works can be done at any time and in any place, without regard to the external environment.



GALVANISED ALUMINIUM BODY

SHERP designers paid special attention to the choice of body material. The use of aluminum makes the ATV body corrosion resistant, light and durable.

Detailed Specs

Maximum speed (at the top-gear), 40 km/h

Minimum speed (at the low-gear), 1.5 km/h

Speed on the water, 6 km/h

Tubeless, extra-low pressure tyres

Tyre size in inches, 63 х 23-25

Fuel consumption, 3L/h

Fuel tank volume, 56L

Length, 3404mm

Width, 2420mm

Height, 2520mm

Dry tare weight, 1300kg

Volume, 1498 cm3

Load capacity, 997kg

Seats with seat belts, 2

Maximum speed (at the top-gear), 40 km/h

Minimum speed (at the low-gear), 1.5 km/h

Speed on the water, 6 km/h

Fuel consumption, 3L/h

Fuel tank volume, 56L

Fuel type, diesel

Ultimate output, 44hp

Gearbox, mechanical 5 speed

Suspension, pneumocirculation

Parking brake system, independent

Clutch, SACHS

Cylinder count, 4

Maximum speed (at the top-gear), 40 km/h

Minimum speed (at the low-gear), 1.5 km/h

Speed on the water, 6 km/h

Tubeless, extra-low pressure tyres

Climbing capability, 3ft

Uphill gradient, 35°

Dry tare weight, 1300kg

Ultimate output, 44hp

Gearbox, mechanical 5 speed

Suspension, pneumocirculation

Parking brake system, independent

Clutch, SACHS

Clearance, 2ft

Cylinder count, 4

Maintenance Intervals, 50h

Parking brake system, independent

Clutch, SACHS

Clearance, 2ft

Cylinder count, 4

Load capacity, 997kg

Seats with seat belts, 2

Maintenance Intervals, 50h

Parking brake system, independent

Clutch, SACHS

Clearance, 2ft

Cylinder count, 4

Load capacity, 997kg

Seats with seat belts, 2

OVERCOMES 300MM OBSTACLES

The SHERP easily overcomes most terrain, including slopes with an angle of up to 35 degrees. The SHERP is ready for the toughest offroad challenges.

TRAVERSES 35 DEGREE SLOPES

The SHERP is able to traverse slopes up to 35 degrees, allowing you to tackle some of the biggest off road obstacles.

WADES THROUGH WATER

The SHERP has a fully sealed body which allows it to stay afloat even with no tyre pressure, or with no wheels at all.

SPEEDS UP TO 45KM/H

The SHERP is able to travel at speeds up to 45 kilometres per hour on land, and up to 6 kilometres on the water.

FREE AIR CIRCULATING SUSPENSION

The suspension design does not include any springs, shock absorbers, struts and other conventional elements. Fewer parts, higher reliability, fewer breakdowns, lower repair costs.

TYRE INFLATION SYSTEM

It takes less than 30 seconds to reach the operating tyre pressure, allowing you to change your tyre pressure on the move. The tyres are self-inflated using exhaust gases.

FLAT BOTTOM

The bottom of the SHERP is flat. Without any parts that could cling to obstacles and reduce speed, you can enjoy cross-country capability and speed.

POLYURETHANE COATING

The sides and bottom of the ATV are covered with a highly durable Raptor polyurethane coating to protect them from corrosion and minor mechanical
damage.

SKID STEERING

The SHERP is able to turn around almost on the spot. This manoeuvrability is extremely important in the wild, where each centimetre can be crucial.

TUBELESS LOW PRESSURE TYRES

SHERP tyres are tubeless, and ultra-low pressure
with a special tread pattern. The reliability of tyres is achieved through the use of high-quality materials (special-composition rubber and cord) and advanced production technologies.

FOUR FULL SLEEPING BERTHS

The unfolding flooring allows increasing the number of full-size beds up to four. Benches in the cargo/passenger section are made of high-quality wear-resistant material and are removable, and can be used as an additional storage space.

EXCELLENT DRIVE

Driving the SHERP is easy, and can be quickly mastered after a few kilometres. The SHERP’s well-thought ergonomics makes it comfortable to use for any purpose.